Lead times vary depending on demand and the specific product. Please check the specific product page or contact us for current lead times before ordering.

Yes. Our kits are designed for DIY fitment and most competent home mechanics fit them at home with basic hand tools. Every kit includes a cutting and drilling template plus all the brackets and stainless fasteners, so the measuring and guesswork is done for you.

On a snorkel, the main job is trimming the guard and drilling the mounting holes using the supplied template. Our aftermarket airboxes push-fit into the factory mounts and take most people under an hour. Step-by-step guides for your vehicle are at install.cannafab.com.au.

Prefer to have it done for you? We offer professional fitting in VIC, QLD, SA and NSW — book a fitting here. Please read our installation policy before purchase.

Everything you need to fit it, with nothing extra to buy. Snorkel kits include the 304 stainless snorkel body, mounting brackets, a cutting and drilling template, stainless fasteners, and the fittings to connect to your airbox. Aftermarket airbox kits include the airbox, filter, mounting hardware and, where required, an ECU relocation bracket, ready to push-fit into the factory mounts.

The exact contents are listed on each product page, and every kit comes with access to our online install guides. It is all designed and made in house in Melbourne.

Only a handful of common tools: a 9mm drill bit, a step drill bit, an air saw, and 3mm and 4mm allen keys. The supplied template shows exactly where to cut and drill, so there is no special tooling or measuring required. The full tool list for your vehicle is in the install guide.

It varies by vehicle, but most snorkels take a few hours in the driveway, and our push-fit aftermarket airboxes take most people under an hour. Take your time on the guard cut, the template makes it straightforward.

Yes, we offer installation / fitting services in VIC, QLD, SA and NSW. Book a fitting here.

Yes. All CannaFab snorkels, airboxes and accessories are designed and fabricated in Melbourne. We control the majority of the process in house so we can keep a close eye on fitment, quality and finish.

Our products are designed to improve airflow and reduce restriction compared with most factory setups. Many customers notice better throttle response and induction sound. Actual power gains depend on your vehicle, supporting mods and tuning.

A tune is not required for most vehicles, but it can help you take full advantage of any airflow improvements and other performance mods. Speak with your tuner for advice specific to your setup.

Our snorkels and airboxes are designed to be fully sealed when installed correctly. However, safe water crossings depend on installation quality, vehicle condition and driver judgment. Always check for leaks and never exceed your manufacturer's recommended wading depth. To ensure a watertight system we recommend installing our aftermarket airbox along with your snorkel.

You can view our snorkel face, finish and colour options on the snorkel options page.

Check your order any time on the order status page, or contact us with your order number.