5-Ply Silicone Hose 90° Reducer Bend (4" to 3.5", 4" to 3")

Custom 5-ply silicone, not a standard hose. We have these made to our own spec with 5 plies of reinforcement and a thick wall. Most off-the-shelf hoses are 4-ply with a 4 to 5mm wall. The extra ply and thicker wall hold their shape under clamp pressure and last longer in engine bay heat.

A 90° reducer bend turns a corner and changes size in one piece. That means fewer joins and fewer clamps that can leak, for example where a 4" snorkel outlet runs into a smaller airbox inlet.

Sizes

• 4" to 3.5": 102mm to 89mm ID
• 4" to 3": 102mm to 76mm ID

Features

• Custom 5-ply reinforced silicone
• Handles heat, vibration and water crossings without going soft
• Legs can be trimmed to suit your setup
• Made for air intake plumbing. Not for fuel lines.

Clamps are not included. Each bend takes one clamp per end:

• 4" end: 1 x 105-127mm clamp
• 3.5" end: 1 x 84-108mm clamp
• 3" end: 1 x 72-95mm clamp

Specced and supplied by Canna Fabrication in Melbourne.